To Disconnect From A Power Source And A Pc - Casio CW-50 User Manual

Important!
• Do not operate the printer while it is standing up on its side. Also, you
should not store the printer standing on its side when you are not using it.
• Note that you cannot load or remove a disc unless both the AC adaptor
and USB cable are connected to the printer.
Connecting for the First Time
• A USB driver installation Wizard starts up automatically the first time
you connect the printer to your computer after installing the DISC
TITLE PRINTER appliciation. Follow the instructions that appear on
the display to install the USB driver.
• If you are running Windows XP, the message shown below will appear
during USB driver installation. When it does, click Continue to proceed
with the installation.
• If you are running Windows 2000, the warning message "Digital Signature
Not Found" may appear during USB driver installation. When it does,
click Yes to proceed with the installation.
• The above messages do not appear on a system running Windows 98,
98SE, or ME.
20

To disconnect from a power source and a PC

1.
Unplug the USB cable from the PC and printer.
2.
Unplug the power cord from the wall outlet, and then unplug the AC adaptor
from the printer.
1
1
Important!
Never disconnect the AC adaptor, power cord, or USB cable while a print
operation is in progress. Doing so creates the risk of malfunction.
2
2