Table of Contents
Advertisement
Highpoint HPT372 Driver Installation
Install driver during Windows XP installation
1. Go to "d:\raid\\hpt372\" directory, (assuming that your
CD-ROM is drive d) copy all the files and directory to a
floppy disk.
2. Booting from CD-ROM, when the
screen appear and prompt user to press F6 key to install
third party SCSI or RAID driver, please press F6 Key.
3. Press
S
XP Setup
4. The system will ask whether to install driver under
under
Windows
Windows XP.
5. Insert the floppy disk of driver, then press
6. In the follow-on window of device type, please select
HPT370/HPT372
Windows XP
7. Win XP will prompt you that a message that the driver is
newer than the default driver, press S to continue.
8. The follow-on interface will list the devices to be installed, in
which
HPT370/ HPT372 UDMA/ATA RAID Controller
should be included. (If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)
9. Press ENTER to continue Windows XP setup.
key to specify additional devices when the
window appears.
XP, please select to install driver under
UDMA/ATA
to continue.
SY-P4-645DX DRAGON Ultra
Windows XP Setup
RAID
90
blue
Windows
WinNT
Enter
to continue.
Controller
for
item
or
Advertisement
Table of Contents
