Power Management; Screen Blank State; Putting The Computer To Sleep Or Shutting It Down; Putting Your Computer To Sleep - Lenovo Yoga 2 11 Manual

Power management

Note: Power management modes are not supported for an APM operating
system.
To reduce power consumption, the computer has two power management
modes: screen blank and sleep (standby).

Screen blank state

If the time set on the "Turn off monitor" timer in the operating system expires,
the LCD backlight turns off. You can also turn off the LCD backlight by
pressing
To end screen blank state and resume normal operation, press

Putting the computer to sleep or shutting it down

When you have finished working with your computer, you can put it to sleep or
shut it down.

Putting your computer to sleep

If you will be away from your computer briefly, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process.
To put the computer to sleep, do one of the following:
• Close the display panel.
• Press the Power button.
• Open the charms and then select Settings
Note: Put your computer to sleep before you move it. Moving your computer
while the hard disk drive is spinning can damage the hard disk, causing loss of
data.
To wake the computer, do one of the following:
• Press any key on the keyboard. (Notebook mode only)
• Press the Power button.
• Press the Windows button.
.
Related service information
→ Power → Sleep.
.
25