Crime Guard 750i6 Operation Manual page 5

Vehicle security
Hide thumbs Also See for 750i6:
Table of Contents

Advertisement

Feature #18 Door Activated Anti-Carjacking Protection
Factory Default Setting
Off
Option:
On
This form of Anti-Carjacking is initiated by a door being opened. The Anti-
Carjacking protection, including the three ways to initiate it are described on page
21.
Feature #19 Remote Activated Anti-Carjacking Protection
Factory Default Setting
Off
Option:
On
This form of Anti-Carjacking is initiated by a signal from the controller or
transmitter. The Anti-Carjacking protection, including the three ways to initiate it
are described on page 21.
Feature #20 Open Door Warning Upon Arming
Factory Default Setting
Off
Option:
On
When this feature is turned on, if one of the vehicle's doors is open at the time that
the system is armed via the controller or transmitter, the siren will chirp 3 times and
the parking lights will flash 3 times instead of once.
Feature #21 "III" Button Operation
Factory Default Setting
3rd Channel
press "arm/lock" button to program
(
Options:
press "disarm/unlock" button to program
Panic
(
press "II" button to program
4th Channel
(
5th Channel
(
press "III" button to program
This feature changes how the controller's or transmitter's "III" button operates.
Normal operation, or the default setting, has the "III" button operate the 3rd channel
output. This feature allows changing it to instead operate the panic function or either
of the two other optional channel outputs should a dedicated one-button operation
be desired for any of these functions. Panic can always be operated, by the
alternative methods of pressing either the "arm/lock" and "disarm/unlock" button
for 3 seconds. This feature can also assign the 4th and 5th channels to the "III"
button, in the same manner as the 3rd channel.
press "disarm/unlock" button to program
(
(
press "arm/lock" button to program
press "disarm/unlock" button to program
(
press "arm/lock" button to program
(
(
press "disarm/unlock" button to program
press "arm/lock" button to program
(
)
)
)
Page - 32
)
"II" button
)
)
)
"arm/lock"
)
)
"arm/lock"
Pressing and releasing the "arm/lock" button arms the security system and
locks the doors.
)
Pressing and holding this button for three seconds will first arm, and then
activate the Panic feature, locking the doors.
Pressing and releasing this button 2 times within 5 seconds will activate the 2-
way controller's parking timer which you can use to time how long you've
parked your vehicle in a particular spot or parking meter.
"disarm/unlock"
Pressing and releasing the "disarm/unlock" button disarms the system and
unlocks the doors unless the alarm is triggered, in which case it will disarm the
activated alarm, but not unlock the doors unless the button is pressed again.
Pressing and holding this button for three seconds will first disarm, and then
activate the Panic feature, unlocking the doors.
The unlock operation may be optionally configured during the system's
installation so that pressing this button once disarms the system and unlocks
only the driver's door, and pressing a second time unlocks all of the doors.
"P"rogram
"III" button
button
2-Way Controller
The
1-Way Transmitter
The
button
"II" button
"III" button
Page - 5
"disarm/unlock"
button
"arm/lock"
button
"disarm/unlock"
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents