Table Of Contents - Crime Guard 750i6 Operation Manual

Vehicle security
Hide thumbs Also See for 750i6:
Table of Contents

Advertisement

The final 3 Programmable Features are for the installer's use.
Note: Features #23 and #24 involve two outputs of the Crime Guard control
unit which give the installer greater flexibility. These outputs can be programmed
to perform several different functions and they must be configured by the installer
to perform the desired operations.
Feature #23 Lock Relay Functions
Factory Default Setting
Door Lock Output
press "arm/lock" button to program
(
Options:
press "disarm/unlock" button to program
Parking Light Output
(
Channel 4 Latch Output
(
press "II" button to program
Channel 4 On Demand Output
The Crime Guard 650i
5
has two built-in relays, which can be programmed to
perform several different functions. Although the primary function, or default
setting, of this relay is to operate as a door "lock" function, there are many vehicles
which don't actually require a relay in which case the relay is available for the
optional functions. Other options for this relay are parking light flash, and an
additional remote output, operated by the transmitter's "arm/lock" and "II"
buttons together, and in two forms: "Latch", in which the output toggles with
each buttons press, and "On Demand" which is output while the buttons are being
pressed. Feature #21 can change this channel's button assignment.
Feature #24 Unlock Relay Functions
Factory Default Setting
Door Unlock Output
(
press "arm/lock" button to program
Options:
press "disarm/unlock" button to program
Horn Output
(
Channel 5 Latch Output
(
press "II" button to program
Channel 5 On Demand Output
This is the second of two built-in relays which can be programmed to perform
several different functions. As described above for the "lock" relay, the primary
function of this second relay is the "unlock" function, which in many cases is not
required and making the relay available for other uses. In the case of this relay,
a very popular application is operating the vehicle's existing horn; either in
conjunction with the electronic siren, or in place of the siren. Using both the siren
and the horn creates an extremely effective security system. The remaining options
are Channel 5, with the same operation parameters as described above for Channel
4, except that the "disarm/unlock" and "III" buttons operate it.
)
(
press "III" button to program
)
press "III" button to program
(
Page - 34
Introduction to the System ..................................................... 4-6
Using the Crime Guard System ................................................ 7
Arming Using the Controller or Transmitter .......................... 7-8
Arming Bypass, Sensor Bypass
)
Automatic "Last Door Arming" of the System ....................... 8-9
)
)
Disarming By Emergency Override ........................................ 11-12
Remote Panic Feature .............................................................. 12
Other Controller and Transmitter Operations ......................... 13
Silent Arming & Disarming
Using the Valet Switch ............................................................ 14-15
SecureCode .............................................................................. 15
The Status Light ...................................................................... 16
2-Way Controller ..................................................................... 17-20
Icons & Programming
)
Anti-Carjacking Protection ..................................................... 21
)
Controller and Transmitter Protection .................................... 22
How to Program Controllers or Transmitters ......................... 22-23
)
Programmable Features List .................................................... 24
How to Program Features ........................................................ 25-26
Programmable Features Descriptions ..................................... 26-34
Programmable Features Matrix ............................................... 35
Limited Lifetime Warranty .............................................. Back Cover
This Booklet Contains
An Important Note .........................................
,
Sensor Bypass;2nd, 3rd, 4th & 5th Channels
Page - 3
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents