Table of Contents
Advertisement
Chapter 4
A-1 Installing Windows 2000/XP on a SATA drive
Windows 2000
(for the version 3.6 of driver)
1.
Copy the SATA drivers from the driver CD. (CDROM:
Chipset\Nvidia\Nf4\Win2k_xp\Ide\Win2k→copy all the files except for the
Directory "raidtool") into a floppy disk
2.
When the message "Press F6 if you need to install a third party SCSI or RAID
driver" shows up during Win2000/XP installation, press "F6"
3.
Put the floppy disk in and wait for a little while.
4.
Press "S" to install other drivers when next screen pops up.
5.
Then the installation program will detect two drivers: "nVidia Raid class
driver(required)" and "nVidia nforce storage controller(required)"
6.
First select "nVidia Raid class driver(required)" and press ENTER
7.
Then select "nVidia nforce storage controller(required)" and press ENTER
8.
Windows XP will ask you again whether to specify additional device, just press
ENTER
Windows XP
(for the version 3.6 of driver)
1.
Copy the SATA drivers from the driver CD. (CDROM:
Chipset\Nvidia\Nf4\Win2k_xp\Ide\Winxp→copy all the files except for the
Directory "raidtool") into a floppy disk
2.
When the message "Press F6 if you need to install a third party SCSI or RAID
driver" shows up during Win2000/XP installation, press "F6"
3.
Put the floppy disk in and wait for a little while.
4.
Press "S" to install other drivers when next screen pops up.
5.
Then the installation program will detect two drivers: "nVidia Raid class
driver(required)" and "nVidia nforce storage controller(required)"
6.
First select "nVidia Raid class driver(required)" and press ENTER
7.
Then select "nVidia nforce storage controller(required)" and press ENTER
8.
Windows XP will ask you again whether to specify additional device, just press
ENTER
32
Appendix
Advertisement
Table of Contents
