Table of Contents
Advertisement
Chapter 2
5. Mounting a Motherboard into a Chassis:
Use standoffs and screws to securely mount the motherboard. Install the standoffs
based on the mounting holes of you motherboard layout.
6. Adding an expansion card:
Align the card with the proper slot and fully seat the card. Secure with the retention
screw.
7. Connecting I/O ports and device connectors:
Plug the cable into the respective device port or connector as shown in the manual or
silkscreen printed on the motherboard.
8. Connecting the Power Supply Cables:
Plug in the 21- pin ATX power cable to the motherboard's power connector and make
sure the cable is seated fully.
8
Advertisement
Table of Contents
