Satellite Link; Copying A Cassette Tape - Philips DVP3355V User Manual

Satellite Link

You can set the Unit to start recording whenever it detects a video signal from the External Tuner (Cable/Satellite or Converter Set-top Box).
Preparing for the Satellite Link Timer Recording:
Preparation on the tuner
• Satellite link accepts only the connection from L1 (rear) with the
External Tuner (Cable/Satellite or Converter Set-top Box). (The
connection from L2 cannot read any signals from the External Tuner.)
• The External Tuner (Cable/Satellite or Converter Set-top Box) should
be equipped with some kind of timer function. Using timer function for
the tuner, set it to output audio/video signals when it comes to the time
you want to start recording and to stop an output of audio/video signals
when it comes to the time you want to finish the recording. Refer to
the External Tuner's manual on how to set the timer.
• Make sure to turn off the External Tuner when you finish setting it up.
1
Press [SPEED] to select the desired tape speed.
Tape speed
Type of tape
SP mode
SP
SLP mode
2
In Stop mode, press [SETUP].
3
Select "SATELLITE LINK".
Then press [B] to go to next step.
or
4
Set the desired start hour.
Then press [B] to go to next step.
or
• The hour can be selected from 1-12 with AM or PM.
• When the External Tuner (Cable/Satellite or Converter Set-top Box)
signal is stopped, recording will be stopped.
Note(s):
• If you have not set the clock, "CLOCK SET" menu will appear at step 2. Refer to "Clock Setting" on page 12.
• You cannot set the ending time for the satellite link timer recording on this Unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.
e.g.) In case the satellite link timer recording is overlapped
on the existing timer recording.
timer recording
satellite link
recording result

Copying a Cassette Tape

Warning: Unauthorized recordings of copyrighted cassette tapes
may be an infringement of copyright laws.
1) Insert a pre-recorded cassette tape into another external
device for playback.
2) Insert a recordable cassette tape into this Unit for recording.
3) Press [SPEED] on the Remote Control to select recording
speed (SP or SLP).
4) Press [INPUT] on the Remote Control to select L1 or L2.
Choose L1 if device is connected to rear input jacks or L2 if
connected to the front input jacks. Refer to
Terminals on page 13 for more details.
"
5) Press [REC] on the Unit.
6) Press "PLAY" button on the external device.
7) To stop recording, press [STOP/EJECT C A] on this Unit,
then stop playback of the external device.
Recording / playback time
T60 T120 T160
1hour 2hours 2-2/3hours
3hours 6hours 8hours
- M E N U -
TIMER PROGRAMMING
B SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT
SATELLITE LINK
1 2 : 0 0 AM
e.g.) In case the timer recording is programmed in the middle
of the satellite link timer recording
timer recording
satellite link
recording result
Front & Rear
"
– – 18
Preparation on this Unit
L1
DVD DVD/VCR VCR
DIGITAL AUDIO S-VIDEO COMPONENT AUDIO OUT AUDIO IN
VIDEO OUT
OUT OUT
AUDIO OUT
Y L L
L
C /
B R R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C R /
P R
RCA audio/video cables
Note(s):
• Please purchase the necessary cables at your local store. (Refer to page 11.)
5
Set the desired start minutes.
If you wish to go back to the left, press [s ].
or
6
Press [B] to set satellite link standby mode.
• TIMER REC indicator on this Unit lights up and the Unit goes to
the DVD mode. If you do not use DVD function, turn off the Unit.
• Satellite Unit must be turned on for VCR satellite link to start.
If an External Tuner (Cable/Satellite or Converter Set-top Box) is
not set to output signals, satellite link will remain in standby mode.
To cancel the satellite link function in standby mode:
Press [TIMER SET] on the Remote Control or
[STOP/EJECT C A] on this Unit.
To cancel the satellite link function while the satellite link
recording is in progress:
Press [STOP/EJECT C A] on this Unit.
e.g.) In case the timer recording is overlapped on the existing
satellite link timer recording.
timer recording
satellite link
recording result
output jacks of
external device
AUDIO OUT
RCA audio/video
L
or
cables
R
VIDEO OUT
You can use a video disc player, Cable/Satellite Set-top Box or other audio/
video component with audio/video output jacks.
Note(s):
• For best results during dubbing, use buttons on this Unit whenever
possible. The Remote Control might affect another device's operation.
• Always use video-quality shielded cables with RCA-type connectors.
Standard audio cables are not recommended.
• L2 input jacks are on the front of this Unit.
• Please purchase the necessary cables at your local store. (Refer to page 11.)
–
External Tuner
(Cable/Satellite or
Converter Set-top Box)
SATELLITE LINK
0 1 : 0 0 PM
SATELLITE LINK
0 1 : 3 0 PM
[ON]
rear of the Unit
L1
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
VIDEO OUT VIDEO IN
EN