And Time - Radio Shack 14 Minute Owner's Manual

± ±
"016'" "
• If there is a delay of
20 seconds between
any of the steps, the
system exits day/
time setup mode.
Start again from
step 1.
• If you have not set
the day and time and
you press # # # # /TIME
CHECK, the system
announces "Please
set time".
8
advance until you set the correct day

and time.

1. Turn on the system.
, , , ,
2. Hold down
/TIME SET
two seconds, then release it. The
system announces "Monday" and
appears on the display.
, , , ,
3. Repeatedly press
you hear or see the correct day.
4. Press # # # # /TIME CHECK
announces "twelve AM", and
appears on the display.
, , , ,
5. Repeatedly press
you hear or see the correct hour.
6. Press # # # # /TIME CHECK
announces "0", and
the display.
, , , ,
7. Repeatedly press
you hear or see the correct minute.
8. Press # # # # /TIME CHECK
the setting. The system announces
the current day of the week and
the time. ± ± ± ±
9. To hear the current day and time,
press # # # # /TIME CHECK
for about
' ' ' '
until
/TIME SET
. The system
&& && && &&
until
/TIME SET
. The system
&& && && &&
appears on
until
/TIME SET
to confirm
.