Replacing A Memory Module - Lenovo C3 Series User Manual

Hide thumbs Also See for C3 Series:

Table of Contents

3. Disconnect all cables attached to the computer. This includes power cords,

input/output (I/O) cables, and any other cables that are connected to the

computer. Refer to "Left and right views" and "Rear view" for help with locating

the various connectors.

4. Remove the foot base. Refer to "Removing the foot base".

5. Lift up the stand holder

6. To reattach the foot cover:

a. Lift up the stand holder.

b. Line up the foot cover with mounting holes on the back of the computer,

then slide it back into position.

Replacing a memory module

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool

down before removing the cover.

Note: It may be helpful to place the computer face-down on a soft flat

surface for this procedure. Lenovo recommends that you use a blanket,

towel, or other soft cloth to protect the touch screen from scratches or

other damage.

1. Remove any media (disks, CDs, or memory cards) from the drives, shut down

the operating system, and turn off the computer and all attached devices.

2. Unplug all power cords from electrical outlets.

then slide out the foot cover as shown.

User Guide

Table of Contents