Table of Contents
Advertisement
Quick Links
INSTALLER AND OWNER GUIDE
Model 828
Electric Heater
Fitted with one of the following fascia.
Blenheim
GC No. EF-032-21
This guide is intended to help you
install and care for your Baxi Fires
Division electric heater. Please read
carefully before installing and using
your heater. However, if further
information is required, our
Baxi Fires Division Technical
Helpline
will be pleased to help.
Telephone 08706 061 065
(National call rates apply in the United
Kingdom)
In the Republic of Ireland
Telephone 0044 8706 061 065
Important: Please keep your guide in a safe place for future reference
©
Baxi Heating U.K. Limited 2007.
Seattle
or
5122417-01
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baxi Fires Division 828 Longlite
Summary of Contents for Baxi Fires Division 828 Longlite
- Page 1 Division electric heater. Please read carefully before installing and using your heater. However, if further information is required, our Baxi Fires Division Technical Helpline will be pleased to help. Telephone 08706 061 065 (National call rates apply in the United...
- Page 2 the nation’s favourite PLUMBING & HEATING SUPPLIES FREE SHIPPING SECURE PAYMENTS on all orders over £100 to mainland UK shop online with confidence FINANCE AVAILABLE PRICE MATCH spread the cost with low interest rates always get the best deals available we have H U G E R E D U C T I O N S...
- Page 3 Warning: Any person who does any unauthorised act in relation to a copyright work may be liable to criminal prosecution and civil claims for damages. Baxi Fires Division, Erdington, Birmingham B24 9QP www.firesandstoves.co.uk Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication ©...
-
Page 4: Customer Care
Baxi Fires Division heaters are CE Approved and designed to meet the appropriate British Standards and Safety Marks. Quality and Excellence. All Baxi Fires Division heaters are manufactured to the highest standards of quality and excellence and are manufactured to ISO 9001 CUSTOMER CARE... -
Page 5: Handling And Unpacking
0.63 * An optional spacer frame kit is obtainable either from the your heater supplier or direct from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number 05801T1). One person should be sufficient to lift the heater. If for any reason this weight is considered too heavy then obtain assistance. - Page 6 At least 75mm (At least 3 inches) An optional spacer frame kit is obtainable either from the your heater supplier or direct from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number 05801T1). ©...
- Page 7 INSTALLER AND OWNER GUIDE Important electrical safety. The heater must not be located in front of or under an electrical socket, the socket must always be accessible in order to disconnect the heater from the electrical supply for maintenance and cleaning. Important! This heater must be earthed.
-
Page 8: Removing The Fascia
2. Place the electrical cable into the guide and close the top of the cable guide. If the electric cable is damaged, to avoid a hazard it must be replaced by a Baxi Fires Division authorised service agent, or similarly qualified person (See the last page of this guide for useful telephone numbers). - Page 9 Spacer Frame*. * An optional spacer frame kit is obtainable either from the your heater supplier or direct from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number 05801T1). If fitting the heater into a fireplace or surround opening, try the heater in the opening to ensure that it will fit.
- Page 10 INSTALLER AND OWNER GUIDE at a height of 533-560mm (21 inches - 22 inches) (See figure 5). 3. Drill an appropriate size hole in the marked position. 4. Insert a wall plug into the drilled hole. 5. Screw the eyescrew into the wall plug. 6.
- Page 11 INSTALLER AND OWNER GUIDE Method C - Spacer Frame The optional spacer frame is for use during installations where a chimney recess or rebated fire surround are not available. For your safety the frame and heater must be securely fixed to the rear wall. Fitting the spacer frame The rear of the spacer has two screw location slots in the top flange.
-
Page 12: Fitting The Fascia
INSTALLER AND OWNER GUIDE Fitting the Fascia Blenheim model. 1. Removing the fascia trim may have moved the magnets used to fix it to the heater. The magnets should be located as in figure 10. 2. Locate the fascia onto the heater. Ensure that the sides of the fascia sit on the floor / hearth. -
Page 13: Using The Heater
INSTALLER AND OWNER GUIDE Seattle model. 1. With the fascia trim removed , align the four holes in the firefront assembly with those on the heater (See figure 12). Secure with the four screws supplied. 2. Removing the fascia trim may have moved the magnets used to fix it to the heater. -
Page 14: Cleaning And Maintaining The Heater
INSTALLER AND OWNER GUIDE CLEANING AND MAINTAINING THE HEATER How do I clean my heater? The heater fascia and plastic parts need only to be wiped clean with a dry soft cloth, do not use polishes or abrasive materials. I have a problem with my heater! Important Safety Before undertaking maintenance or replacing the light bulb(s) always disconnect the heater from the electricity supply by removing the 3 pin plug and allowing the... - Page 15 4. I Have a problem that is different to those in the previous examples 1- 3. Following is a list of useful telephone numbers For general advice about your heater: BAXI FIRES DIVISION TECHNICAL HELPLINE 08706 061 065. To report faults or arrange for your heater to be serviced: BAXI FIRES DIVISION SERVICE 08706 090 081.
-
Page 16: Environmental Protection
INSTALLER AND OWNER GUIDE What should I do when I’m ready to dispose of my heater? The plug should be removed from the mains supply cable and the mains supply cable cut from the heater. Environmental Protection. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Need help?
Do you have a question about the 828 Longlite and is the answer not in the manual?
Questions and answers
The second switch to operate the 1kW fan heat has broken into pieces. Can I replace this switch?
The document does not provide instructions or approval for replacing individual switches, including the second switch for the 1kW fan heat, on a Baxi 828 Longlite. For safety and proper repair, it is recommended to contact the manufacturer’s service or technical helpline.
This answer is automatically generated