Table of Contents
Advertisement
Quick Links
INSTALLER AND OWNER GUIDE
Model 826
Dream
Electric Heater incorporating the
Baxi Fires Division
(EF-032-26)
This guide is intended to help you
install and care for your Baxi Fires
Division electric heater. Please read
carefully before installing and using
your heater. However, if further
information is required, our
Baxi Fires Division Technical
Helpline
will be pleased to help.
Telephone 08706 061 065
(National call rates apply in the United
Kingdom)
In the Republic of Ireland
Telephone 0044 8706 061 065
Important: Please keep your guide in a safe place for future reference
©
Baxi Heating U.K. Limited 2006.
5121235-01
Control
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baxi Fires Division 826 dream longlite
Summary of Contents for Baxi Fires Division 826 dream longlite
- Page 1 Division electric heater. Please read carefully before installing and using your heater. However, if further information is required, our Baxi Fires Division Technical Helpline will be pleased to help. Telephone 08706 061 065 (National call rates apply in the United...
- Page 2 Warning: Any person who does any unauthorised act in relation to a copyright work may be liable to criminal prosecution and civil claims for damages. Baxi Fires Division, Erdington, Birmingham B24 9QP www.firesandstoves.co.uk Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication ©...
-
Page 3: Customer Care
Baxi Fires Division heaters are CE Approved and designed to meet the appropriate British Standards and Safety Marks. Quality and Excellence. All Baxi Fires Division heaters are manufactured to the highest standards of quality and excellence and are manufactured to ISO 9001 CUSTOMER CARE... -
Page 4: Handling And Unpacking
0.72 * An optional spacer frame kit is obtainable either from the your heater supplier or direct from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number 0582631). One person should be sufficient to lift the heater. If for any reason this weight is considered too heavy then obtain assistance. - Page 5 At least 75mm (At least 3 inches) An optional spacer frame kit is obtainable either from the your heater supplier or direct from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number 0582631). ©...
- Page 6 INSTALLER AND OWNER GUIDE Important electrical safety. The heater must not be located in front of or under an electrical socket, the socket must always be accessible in order to disconnect the heater from the electrical supply for maintenance and cleaning. Important! This heater must be earthed.
- Page 7 Wire Fixing. Spacer Frame*. * An optional spacer frame kit is obtainable either from the your heater supplier or direct from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number 0582631). © Baxi Heating U.K. Limited 2006.
- Page 8 INSTALLER AND OWNER GUIDE If fitting the heater into a fireplace or surround opening, try the heater in the opening to ensure that it will fit. If fitting the heater onto a decorative hearth surface such as marble or tile it is advisable to protect the hearth surface.
- Page 9 INSTALLER AND OWNER GUIDE 4. Insert a wall plug into the drilled hole. 5. Screw the eyescrew into the wall plug. 6. Position the heater in front of the fireplace opening. 7. At the top of the heater there are four small holes, two each side of the heater (See figure 6- Item 1).
- Page 10 INSTALLER AND OWNER GUIDE Method C - Spacer Frame The optional spacer frame is for use during installations where a chimney recess or rebated fire surround are not available. For your safety the frame and heater must be securely fixed to the rear wall. Fitting the spacer frame The rear of the spacer has wider flanges.
-
Page 11: Fitting The Fascia
INSTALLER AND OWNER GUIDE plastic screen. Fitting the Fascia 1. Fit the fascia to the heater by hooking the brackets on the rear of the fascia over the brackets on the heater (See figure 10). 2. Secure the fascia to the heater with 2 off hexscrews ‘A’... -
Page 12: Using The Heater
INSTALLER AND OWNER GUIDE USING THE HEATER Important Safety Never cover the heater or obstruct the openings at the base of the heater, this could cause overheating and consequent risk of fire. What are the fireslide control positions for? The heater is operated by the fireslide control located on the upper right hand side of the heater. - Page 13 4. I Have a problem that is different to those in the previous examples 1- 3. Following is a list of useful telephone numbers For general advice about your heater: BAXI FIRES DIVISION TECHNICAL HELPLINE 08706 061 065. To report faults or arrange for your heater to be serviced: BAXI FIRES DIVISION SERVICE 08706 090 081.
-
Page 14: Environmental Protection
INSTALLER AND OWNER GUIDE When ordering spare parts please have the below information available. This will help us to deal with your call quicker and avoid you having to make a second call. Your Post Code Type of Heater (Electric or gas) Model, Name and serial number (This information can be found on a small label attached to the inside lower left of the heater.
Need help?
Do you have a question about the 826 dream longlite and is the answer not in the manual?
Questions and answers