Connect Di-Gps® Mini 3L Series Gps Receiver To Camera - di-GPS Mini 3L Series User Manual

Digital images gps receiver (built-in data logger)
Table of Contents

Advertisement

Connect
di-GPS® Mini 3L series GPS receiver
Connect the DSLR camera and di-GPS® Mini 3L series GPS receiver as described
below.
1.
Turn off the camera.
2.
Remove the cap from the 10 pin remote terminal on the camera body.
Connect di-GPS® Mini 3L series GPS receiver to the camera's 10 pin remote
3.
terminal with 10 pin connector. Do not use any extension cord. For exact cable
connector of different models, please refer to Page 6 – Connector Cable of
GPS® Mini 3L series GPS receiver.
Switch the power mode to "On" or "Auto".
4.
5.
Turn the camera on.
6.
If di-GPS® Mini 3L series GPS receiver is properly connected, the camera will
display a blinking icon on the top control panel. It means the GPS receiver is
searching for a signal. The icon will stop blinking once signal has been
established and the receiver is ready for supplying the current position.
7.
di-GPS® Mini 3L series GPS receiver will automatically detect the connection of
the camera. It cannot be turned on when the camera is not connected whatever
the power mode switch is set to "On" or "Auto". Both "On" and "Auto" mode is
only function when the camera is properly connected.
8.
Each satellite broadcasts a digital message that contains two types of
information. One type is ephemeris data, which includes the assigned serial
number of the satellite, the status of the satellite (healthy or faulty), the current
date and time. The second type is almanac data and includes precise orbital
position of every satellite in the system.
At the initial stage, di-GPS® Mini 3L series GPS receiver needs all these data for
the position fixed. It usually takes a minute to few minutes to receive all data. An
open sky outdoor environment will enable faster acquisition process. It will take a
longer time at a weak signal environment. Once di-GPS® Mini 3L series GPS
receiver locks to the satellites, it will take a few seconds for reacquisition even at
weak signal environment.
di-GPS® is a registered trademark or a trademark of Dawn Technology Limited
Nikon D2HS, D2X, D2XS, D200, D3, D3S, D3X, D300, D300S, D700, D90, D3100, D5000, D5100 and D7000 are registered trademark or a trademark
of NIKON CORPORATION in the United States and/or other countries.
Fujifilm and S5 Pro are registered trademark or a trademark of FUJIFILM U.S.A., Inc. in the United States and/or other countries.
Canon and EOS are registered trademark or a trademark of Canon Inc. in the United States and/or other countries.
Products and brand names are trademarks or registered trademarks of their respective companies.
V1.2
to camera
di-
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mini 3l-s90Mini 3l-s5000

Table of Contents