Radio Shack 7-Channel Weatheradio Owner's Manual page 18

• To reset the Weatheradio to receive all SAME
signals within a 50-mile radius, simply enter
the code 99 in the first memory position. See
"Using the Weatheradio's 'All Signals' Code"
on Page 19.
• For easy reference, write down each FIPS
code you store in memory on the label located
beneath the Weatheradio's keypad cover.
8. Press
YES
memory.
If you set
code (if any) stored in the next memory position
appears on the display. Repeat Steps 4–6 for
each code (up to 15) you want to change or add.
When you press
(15th) memory position, the code you stored in
the first position reappears.
If you set
play does not change.
9. When you finish, set
OPERATE
"Using the Alert Function" on Page 24).
18
to store the code in the Weatheradio's
SINGLE/MULTIPLE
YES
SINGLE/MULTIPLE
. The current alert status appears (see
to
to store a code in the last
to
SINGLE
PROGRAM/OPERATE
, the
MULTIPLE
, the dis-
to