Programming The Weatheradio - Radio Shack 7-Channel Weatheradio Owner's Manual

PROGRAMMING THE
WEATHERADIO
Note: Some of the Weatheradio's keys (such as
are located under the cover on top of the Weathera-
dio. Lift the cover to access the keys.
The first time you use your Weatheradio, it is auto-
matically set to:
• Use the NOAA weather broadcast frequency
162.400 MHz (Channel 1)
• Receive all SAME alert signals broadcast within
a 50-mile radius of where you installed it
Your Weatheradio is preprogrammed with the seven
national NOAA broadcast frequencies (Channels 1–
7). Depending on your location, you might need to se-
lect a different channel.
To select a different broadcast frequency (if neces-
sary) and store or change FIPS codes in the Weath-
eradio's memory (to narrow the area in which you
receive SAME alerts), follow these steps.
14
– )
0 9