Table of Contents
Advertisement
7.
Click Next if you don't want to change the CA's configuration data.
8.
Installation will warn you that Internet Information Services are running, and must be
stopped before continuing. Click Ok, then Finish.
DHCP server configuration
1.
Click on the Start - Programs - Administrative Tools - DHCP
2.
Right-click on the server entry as shown, and select New Scope.
3.
Click Next when the New Scope Wizard Begins.
4.
Enter the name and description for the scope, click Next.
5.
Define the IP address range. Change the subnet mask if necessary. Click Next.
Figure 26: CA Screen
Figure 27: DHCP Screen
PC and Server Configuration
33
Hide quick links:
Advertisement
Table of Contents
