Filter Replacement; Cleaning - Hunter HEPAtech 30772 Owner's Manual

FILTER REPLACEMENT

Filter Change Calendar: The filter calendar is
designed to optimize the performance of the
air purifer by reminding you when to check the
HEPAtech and Pre-filters. It is located around
®
the speed control dial.
Pre-filter Calendar: The outer knob of the
filter change calendar is the pre-filter counter.
To use, align the pre-filter symbol (
the ring with the month that you installed the
pre-filter. The inspection symbol (
the outer knob points to the month in which
you should check the pre-filter for wear. The
pre-filter is designed for 3 months of usage.
Replacing or checking the pre-filter (
) in May means the filter would need to be
checked again (
Pre-filter is secured to the inside of the front
grill with hook tape. To change the pre-filter,
remove the front grill, Figure 1, and gently
remove the pre-filter from the unit. Secure the
new filter to the hook tape and replace the
front grill.
Figure 4.
3 Months
HEPAtech Filter Calendar: The HEPAtech
®
Filter indicator is located in the center of
the calendar ring. To set the HEPAtech
Filter counter, rotate the calendar ring to
align the filter symbol (
that you checked/replaced the filter. Since
the filter is designed for 6 months of use,
the second indicator (
reminder to check the filter every 6 months.
If the HEPAtech filter (
®
February, then the filter would need to be
) on
) in August. Figure 4. The
) with the month
) will serve as a
) is checked in
©2011 Hunter Fan Co.
checked again (
To change the filter, remove the front grill,
Figure 1, and gently remove the HEPAtech
filter from the unit.
NOTE: Remember the orientation of the filter
when removing. Your new filter will be inserted
in the same manner.
Secure the new filter inside the unit and
) on
replace the front grill.
Figure 5.
NOTE: To avoid the risk of electric shock, the
unit should be unplugged before cleaning.
1. Clean the outside of the unit with a soft,
damp cloth. The front grill can be cleaned
in soapy water after it has been removed
from the unit and the pre-filter has been
removed. See Figure 1.
NOTE: Ensure the grill is completely dry before
reinstalling it on the unit. Failure to do so
could cause damage to the filters or motor.
®
2. At least every 90 days, open the front grill,
remove the carbon pre-filter, and replace it.
This is necessary to maintain proper odor-
removing and overall filtration performance.
If necessary, it can be changed more
often. Remember to change the Pre-Filter
Calendar Dial to reflect the new
Pre-Filters installation and to remove any
plastic wrapping that may be on the new
filter before you place it into the Air Purifier.
) in August. Figure 5.
6 Months

CLEANING

5