Operating Your Air Purifier; Filter Replacement - Hunter HEPATECH 30700 Owner's Manual

Hunter fan air cleaner user manual
Table of Contents

Advertisement

oPerATIng Your AIr PurIfIer

On/Speed Control: Rotate the Speed
Control knob to set the desired speed.
Unit off
Low speed - Recommended for
use when soft background noise
is unwanted.
Medium speed - Typical usage setting.
Soft background noise is not an issue.
High speed - Use when quick, efficient
results to a room's air quality are
desired.
The fan speed can be adjusted at any time.
While the unit is running, the light ring will
glow to indicate the unit is on.
Press the Ionizer button to turn on the Ionizer
function of your air purifier.
Ionizer
Button
Pre-Filter
Calendar
On/Off
Speed
Control
figure 7.
NOTE: DO NOT run the ionizer if tobacco
smoke, air fresheners, dripless wax candles,
or grease from cooking is present.

fILTer rePLACemenT

Filter Change Calendar: The filter calendar is
designed to optimize the performance of the
air purifer by reminding you when to check the
HEPAtech
and Pre-filters. It is located around
®
the speed control dial.
Pre-filter Calendar: The outer knob of the
filter change calendar is the pre-filter counter.
To use, align the pre-filter symbol (
the ring with the month that you installed the
©2009 Hunter Fan Co.
pre-filter. The inspection symbol (
the outer knob points to the month in which
you should check the pre-filter for wear. The
pre-filter is designed for 3 months of usage.
Replacing or checking the pre-filter (
) in May means the filter would need to be
checked again (
Filter
Calendar
HEPAtech
Filter indicator is located in the center of
the calendar ring. To set the HEPAtech
Filter counter, rotate the calendar ring to
align the filter symbol (
that you checked/replaced the filter. Since
the filter is designed for 6 months of use,
the second indicator (
reminder to check the filter every 6 months.
If the HEPAtech
February, then the filter would need to be
checked again (
) on
5
) in August. Figure 8.
3 Months
figure 8.
Filter Calendar: The HEPAtech
®
) with the month
) will serve as a
filter (
) is checked in
®
) in August. Figure 9.
6 Months
figure 9.
43066-01 20091221
) on
®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hepatech 30701

Table of Contents