Installation Of Fan - Heat & Glo EM-415 - 36" Owner's Manual

Bend this half tab
down 90 degrees
Figure 7.6 Prepare Junction Box Bracket
Slide the flanges of the junction box
through the slots in the bracket.
Figure 7.7 Position Bracket on Junction Box
Bend remaining half
tab down 90 desgrees.
Figure 7.8 Secure Bracket to Junction Box
24
Bend this tab down
90 degrees
Heat & Glo • EM-415, EM-485 • 33056 • Rev W • 10/08
Figure 7.9 Attach the Heat Shield
Figure 7.10 Attach the Junction Box
G. Installation of Fan
Follow installation instructions supplied with fan kit.