Switching Between Activities; Activity Commands; Gesture Control - Logitech Harmony Touch User Manual

The first time you start an Activity after setup, the Harmony Touch asks you to confirm that everything worked
properly. If you answer "no" the remote will walk you through troubleshooting steps.

Switching between Activities

While an Activity is active, selecting another Activity will leave on or turn on necessary devices, turn off unnecessary
devices, and select the correct inputs for each of the devices. For example, when switching from watching TV to
watching a Blu-ray, Harmony Touch will leave your TV and AV receiver turned on, but will turn off your cable set top
box and turn on your Blu-ray player. Depending on how your AV receiver is set up, Harmony Touch may also change
the AV input from the TV to the Blu-ray player.
TIP: You don't need to turn your system off in between switching Activities. Harmony Touch
remembers what is on and off and switches between Activities automatically.
NOTE: if you would like to keep a particular device on when switching to an Activity that does not use
it, this may be customized by signing into MyHarmony. For example: you may want to keep your
Xbox powered on while you switch to Watch TV so you may return back to Play a Game without
losing your game status. For more information, refer to the
on.

Activity commands

When your Activity starts, all the buttons on Harmony Touch are configured to control that Activity. For example, in
a Watch TV Activity, the volume button will control your AV receiver while the Play and Pause buttons and the
directional navigation will control your cable or satellite set top box. In addition, the screen on the remote is able to
display all the available commands for each device that is participating in the current Activity.

Gesture control

Each Activity allows you to control your devices using simple swipes and taps on the Harmony Touch screen. Eleven
different gestures are supported:

Swipe up

Swipe up and hold

Swipe down
Logitech Harmony Touch
support article for setting devices to stay
24