Golden Technologies GB106 Owner's Manual page 27

™
Buzzaround Lite Owner's Manual RevA_110910
VII. DISASSEMBLY
Remove the Tiller Basket
5. Remove the tiller basket by pulling up.
Fold Down and Lock the Tiller
6. Push in and turn the tiller lock clockwise 90 degrees. See #1 on figure 16.
This will lock the front wheel to keep it from turning side to side to help control while
carrying.
3
2
1
Figure 16. Lowered Tiller
6. Loosen tiller adjustment knob and fold the tiller down flat. See #2 on Figure 16. Then
tighten the adjustment knob to secure the tiller in its new position. Once the tiller is
lowered and locked, and the scooter is disassembled you may use it as a handle for easy
transportation. See #3 on Figure 16.
Separate the Drivetrain from the Frame
Be careful not to pinch your fingers between the frames. This area is a
pinch-point and requires your full attention.
7. Hold the seat post with one hand and push the rear section apart to disconnect the front and rear
frame sections. See Figure 17.
8. Pull the front frame up and off of the drivetrain. See figure 17.
Figure 17. Separating the Drivetrain and Frame
26