Weslo Cadence 55 User Manual

Hide thumbs Also See for Cadence 55:

Manual (20 pages)

User manual (19 pages)

Gebruiksaanwijzing (23 pages)

Table Of Contents

Need help?

Do you have a question about the Cadence 55 and is the answer not in the manual?

Questions and answers

Sarkis isaac

May 29, 2025

When I turn on the tredmail and press the start button it makes a sound and turns off

1 comments:

Mr. Anderson

May 29, 2025

The Weslo Cadence 55 treadmill may make a sound and turn off when the start button is pressed due to a tripped circuit breaker. To fix this:

1. Check the circuit breaker on the treadmill frame near the power cord. If it has tripped (switch protrudes), wait five minutes and press the switch back in.
2. Make sure the power cord is plugged in. If it is, unplug it, wait five minutes, and then plug it back in.
3. Remove the key from the console and reinsert it fully.
4. Ensure the on/off switch near the power cord is in the "on" position.

If the treadmill still does not work, contact customer service.

This answer is automatically generated

Summary of Contents for Weslo Cadence 55

Page 1 USER'S MANUAL Model No. WETL13606.0 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: 08457 089 009 or write: ICON Health &...
Page 2: Table Of Contents
ORDERING REPLACEMENT PARTS ..........Back Cover Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the center of this manual. WESLO is a registered trademark of ICON IP, Inc.
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 11. If an extension cord is needed, use only a 3- that all users of this treadmill are adequately conductor, 1mm (14-gauge) cord that is no...
Page 4 21. Inspect and properly tighten all parts of the scribed in this manual. Never remove the treadmill regularly. motor hood unless instructed to do so by an authorized service representative. Servicing 22. Never drop or insert any object into any other than the procedures in this manual opening.
Page 5: Before You Begin
® CADENCE ing this manual, please see the front cover of this man- 55 treadmill. The CADENCE 55 treadmill combines ad- ual. To help us assist you, please note the product vanced technology with innovative design to make model number and serial number before contacting us.
Page 6: Assembly
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
Page 7 3. With the help of a second person, raise the Uprights (55, 56) so the Base (54) is flat on the floor as shown. Hole Position the front of the treadmill Frame (53) between the Uprights (55, 56) as shown. Next, locate the long wire in- side of the lower end of the Right Upright (see the inset drawing).
Page 8 5. Pivot the piston end of the Gas Spring (101) up to the position shown. Remove the Spring Clip (52) from the piston end of the Gas Spring. Bracket Next, align with piston end of the Gas Spring (101) with the bracket in the center of the Frame (53).
Page 9 8. Insert the slack in the Wire Harness (97) down into the Right Upright (56). Then, tighten the two plastic ties around the Wire Harness, and cut off the ends of the plas- tic ties. Plastic Ties 9. Set the Console Assembly (90) on the Right Upright (56) and the Left Upright (not shown).
Page 10: Operation And Adjustment
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed.
Page 11 CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The treadmill console offers a selection of features Plug in the power cord (see designed to make your workouts more effective. page 10). Next, locate the on/off switch on the treadmill Position When the manual mode of the console is selected, the frame near the right upright.
Page 12 Follow your progress with the track and the HOW TO USE THE MANUAL MODE three displays. The track—The track Insert the key into the console. represents a distance of 400 meters (1/4 mile). See HOW TO TURN ON THE POWER on page As you walk or run on the treadmill, the indica- tors around the track will...
Page 13 To reset the displays, press the Stop button, re- Note: The same speed setting may be pro- move the key, and then reinsert the key. grammed for two or more consecutive periods. The profiles on the left side of the Program Select Note: The console can display speed and dis- button show how the speed of the walking belt will tance in either miles or kilometers.
Page 14 HOW TO CHANGE THE INCLINE OF THE TREADMILL To change the incline, first remove the incline pin from one of the incline legs. Adjust the incline leg to the de- To vary the intensity of your exercise, you can change sired position, and then fully reinsert the incline pin.
Page 15: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
Page 16 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin.
Page 17: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 18 PROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm (14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- 5–7 cm come damaged.
Page 19: Conditioning Guidelines
CONDITIONING GUIDELINES is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand WARNING: Before beginning on the heart to pump blood to the muscles, and on the this or any exercise program, consult your lungs to oxygenate the blood.
Page 20 PART LIST—Model No. WETL13606.0 R0206A No. Qty. Description No. Qty. Description No. Qty. Description Frame Pivot Bolt (Not Used) Controller Upright Bolt Electronics Star Transformer Handrail Bolt Washer Filter Console Screw Motor Tension Nut Power Cord Crossbar Screw Frame Pivot Nut Console Assembly Wheel Housing Bolt Console Crossbar...
Page 21: Part Identification Chart
PART IDENTIFICATION CHART Remove this chart and use it to identify small parts during assembly. Save this chart and the EXPLODED DRAWING/PART LIST for future reference. Console Crossbar Latch/Console Crossbar Star Screw (4)–4 Screw (5)–2 Wheel Housing Back Screw Washer (12)–2 Washer (11)–4 (7)–6 Wheel Housing Bolt (6)–4...
Page 22 EXPLODED DRAWING—Model No. WETL13606.0 R0206A 15 15...
Page 23: Ordering Replacement Parts
To help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (WETL13606.0) • the NAME of the product (WESLO CADENCE 55 treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) •...

This manual is also suitable for:

Wetl13606.0