Table of Contents
Advertisement
switching on
10 Check that the kettle is switched off – press the rear of the switch (0).
11 Put the kettle on the stand – take care not to spill.
12 Plug the stand into a power socket.
13 Press the front of the switch (1) – the light will glow, and the kettle will heat up.
switching off
14 When the water boils the kettle will switch itself off, and the light will go out.
15 To switch off manually, press the rear of the switch.
general
16 Remove the kettle from the stand before pouring.
17 To avoid the risk of splashing, pour slowly and don't over-tilt the kettle.
18 Don't tilt the kettle backwards – water might get on to the control area.
19 If this happens, let the kettle dry before use – sit it somewhere warm for 12 hours.
20 When you lift the kettle, you may see moisture on the stand. Don't worry – it's the
steam used to switch the kettle off automatically, which then condenses and
escapes via vents under the kettle.
using with insufficient water
21 This will shorten the life of the element.
22 A boil-dry cut-out will switch the kettle off.
23 To prevent the kettle cycling on and off, remove the kettle from the stand.
24 Sit the kettle on the work surface till it's cold.
25 Don't fill the kettle till it's cold, or it may spit.
care and maintenance
1 Check that the kettle is switched off – press the rear of the switch (0).
2 Unplug the stand, and let the kettle cool down fully.
3 Wipe the kettle, inside and out, with a damp cloth. You may use a little household
detergent, but if you do, rinse well to avoid tainting the water.
4 Keep all connectors and sockets dry.
5 Don't put the kettle or stand in liquid.
6 Don't use harsh or abrasive cleaning agents or solvents.
descale regularly – even in soft water areas
7 Limescale may be white, coloured, even rusty-looking, but it's normally visible.
8 Phosphate scale isn't generally visible, but it's there, even in soft water areas.
9 All scale causes overheating, reduces the kettle's life, and may trigger the boil-dry
cut-out.
10 So, even with soft water, descale regularly, to help keep your kettle in working order.
11 Use a descaler suitable for plastic products (all kettles have plastic parts).
12 Follow the instructions provided with the descaler, rinse several times, then fill, boil
and discard the water, to ensure no residues are left.
, Products returned under guarantee with faults due to scale will be subject to a
repair charge.
4
Advertisement
Table of Contents
