Advertisement
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other
countries. All other trademarks mentioned in this document or Website are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (0705R)
© 2009 Cisco Systems, Inc. All rights reserved.
Printed in the USA on recycled paper containing 10% postconsumer waste.
78-19064-01
3
Connecting Devices to the
Switch
Perform the steps in this section to connect devices to the switch.
S
1
Power down all of the devices you want to connect to the switch.
TEP
S
2
Connect one end of a Category 5 Ethernet network cable to one of the
TEP
numbered ports on the switch. Connect the other end of the cable to a
computer or other network device.
S
3
Repeat step 2 to connect additional devices.
TEP
S
4
Connect the supplied power adapter to the power port on the side of
TEP
the switch. Plug the other end of the adapter into an electrical outlet.
C
Make sure you use the power adapter included with the
AUTION
switch. Using a different power adapter may damage the
switch.
S
5
Power up the devices connected to the switch. The LED of each active
TEP
port on the switch lights up.
Congratulations! The installation of the 10/100 switch is now complete.
4
Specifications
The following table lists the specifications for the SD205, SD208, and
SD216 10/100 switches.
Item
Specification
Model
SD205, SD208, SD216
Standards
IEEE 802.3, IEEE 802.3u
Ports
• SD205: 5 RJ-45 10/100 Mbps ports
• SD208: 8 RJ-45 10/100 Mbps ports
• SD216: 16 RJ-45 10/100 Mbps ports
Cabling Type
Cat5 Ethernet
LEDs
• SD205: System, Port Status 1—5
• SD208: System, Port Status 1—8
• SD216: System, Port Status 1—16
Security Feature
Security Slot
Dimensions (WxHxD)
• SD205: 3.66 in. x 1. 1 8 in. x 3.54 in.
(93 mm x 30 mm x 90 mm)
• SD208: 5. 1 2 in. x 1. 1 2 in. x 5. 1 1 in.
(130 mm x 28.5 mm x 129.58 mm)
• SD216: 5. 1 2 in. x 1.57 in. x 5. 1 1 in.
(130 mm x 38.5 mm x 129.58 mm)
Unit Weight
• SD205: 8 oz. (0.23 kg)
• SD208: 15 oz. (0.43 kg)
• SD216: 19 oz. (0.54 kg)
Power
• SD205/SD208: 100-240 VAC 50/60 Hz, 0.5 A
• SD216: 100-240 VAC 50/60 Hz, 1 A
Certification
FCC Class B, CE
Operating Temperature
32 to 104°F (0 to 40°C)
Storage Temperature
-40 to 158°F (-40 to 70°C)
Operating Humidity
20 to 95%, noncondensing
Storage Humidity
5 to 90%, noncondensing
5
Where to Go From Here
Resource
Location
Technical
www.cisco.com/en/US/products/ps10007/
Documentation
tsd_products_support_series_home.html
Customer Support
www.cisco.com/en/US/support/
tsd_cisco_small_business_support_center_contacts.
html
Warranty and End
www.cisco.com/go/warranty
User License
Agreement
Open Source License
www.cisco.com/go/osln
Notices
Regulatory
www.cisco.com/en/US/products/ps10007/
Compliance and
prod_installation_guides_list.html
Safety Information
Cisco Partner Central
www.cisco.com/web/partners/sell/smb
site for Small Business
Advertisement
