Download Print this page

Cisco Small Business Unmanaged Switch SD2008 Quick Start Manual

Cisco systems 8-port 10/100/1000 gigabit switch quick start guide
Hide thumbs Also See for Cisco Small Business Unmanaged Switch SD2008:

Advertisement

Quick Links

Quick Start Guide
Cisco Small Business
Model SD2008
8-Port 10/100/1000 Gigabit Switch
Package Contents
SD2008 Gigabit Switch
Power Adapter
Quick Start Guide
1
Product Overview
Thank you for choosing the Cisco 8-Port 10/100/1000 Gigabit Switch. The
Switch provides non-blocking, wire speed switching for your 10, 100, and 1000
Mbps network clients.
Front Panel
The Port Status and System Status LEDs are located on the front panel of the
Switch.
System—(Green) This LED lights up and remains lit when the Switch is
powered on.
Ports 1-8—(Green) Each LED lights up when a connection is made through its
corresponding port. It flashes when the corresponding port is active.
Back Panel
The Ethernet network ports are located on the back panel of the Switch. All
ports are auto-negotiating and have automatic MDI/MDI-X crossover detection.
1-8—These ports connect the Switch to network devices, such as computers.
Side Panel
The power port and security slot are located on the side panels of the Switch.
The power port is where you will connect the power adapter.
The security slot is where you can attach a lock to protect the Switch from theft.
Placement Options
Set the Switch on its four rubber feet, or mount the Switch on a wall.
The Switch offers two wall-mount slots, which are the two crisscross slots on
the bottom panel. The measurement between the two slots is 2.52 inches
(64 mm).
To use the wall-mount option, follow these instructions:
S
1
Attach two screws to the wall, 2.52 inches (64 mm) apart, so that the
TEP
Switch's wall-mount slots can line up with the two screws.
S
2
Maneuver the Switch to insert the screws into the two slots.
TEP
2
Typical Installation Scenario
The application diagram shown here is an example of a typical network
configuration.
When you connect your network devices, make sure you don't exceed the
maximum cabling distances, which are listed in the following table:
From
To
Maximum Distance
Switch
Switch
100 meters (328 feet)
Switch
Computer
100 meters (328 feet)
N
Use Category 5e Ethernet network cables for your Gigabit
OTE
connections.

Advertisement

loading

Summary of Contents for Cisco Cisco Small Business Unmanaged Switch SD2008

  • Page 1 The power port and security slot are located on the side panels of the Switch. The power port is where you will connect the power adapter. The security slot is where you can attach a lock to protect the Switch from theft. Placement Options Set the Switch on its four rubber feet, or mount the Switch on a wall.
  • Page 2 800 553-NETS (6387) Fax: 408 527-0883 Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners.