Check The Safety System - Husqvarna 155 Operator's Manual

Maintenance

Check the safety system

The machine is equipped with a safety system that prevents starting or driving under the following conditions.
The engine should only be possible to start when the cutting unit is in its raised position and the hydrostat pedals are in the neutral
position.The driver does not need to be seated in the driver's seat.
Rider 155 AWD, the engine can not be started if the parking brake is not pressed down.
Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not
met. Change the conditions and try again.
Check that the engine stops if you temporarily move out off the driver's seat while the cutting unit is lowered or the hydrostat pedals
are not in the neutral position.
Start motor
Ignition system
Works
Does not work
Rider 155
Rider 155 AWD
24 –
English