CHAPTER 2
Analog Audio Connections
The Analog Audio output is connected to an audio routing
device such as an A/V Receiver or Multi-Room Controller
using stereo RCA audio cables.
Analog Audio Connections - A/V Receiver
TGM-100
Analog Audio Connections - Multi-Room Controller
TGM-100
Note: 5.1 Digital Audio Outputs are converted to 2 Channel
PCM when Analog Connections are enabled.
Note: When 2 channel PCM outputs are enabled, 5.1 Dig-
tal surround effects are disabled.
Note: Discrete IR codes are available when programming
touchpanels, keypads, etc. in whole-house audio systems.
These IR codes allow switching between stereo and sur-
round formats depending on the application.
10
A/V Receiver
AUX1
Stereo
RCA
Cable
IN
Multi-Room
Controller
SOUCE INPUT 1
V
Stereo
RCA
Cable
SOUCE INPUT 5
VID1
VID3
IN
IN
L
R
Installation Manual