Additional Information; Compatible Devices With This System; Troubleshooting - Sony MHC-EC919iP Operating Instructions Manual

Additional Information

Compatible devices with
this system
iPod/iPhone
You can use the following iPod/iPhone
models with this system. Update your
iPod/iPhone with the latest software
before using it.
Made for
 iPhone 5
 iPhone 4S
 iPhone 4
 iPhone 3GS
 iPod touch (5th generation)
 iPod touch (4th generation)
 iPod touch (3rd generation)
 iPod classic
 iPod nano (7th generation)
 iPod nano (6th generation)
 iPod nano (5th generation)
 iPod nano (4th generation)
USB devices
Check the websites below for the
information about compatible USB
devices.
For customers in Europe:
http://support.sony-europe.com/
For customers in the USA:
http://esupport.sony.com/
For customers in Canada:
http://esupport.sony.com/CA
For customers in other countries/
regions:
http://www.sony-asia.com/support
24
GB

Troubleshooting

1
Make sure the power
cord and speaker cords
are correctly and firmly
connected.
2
Find your problem in the
checklist below, and take the
indicated corrective action.
If the issue persists, contact your
nearest Sony dealer.
If "PROTECT" appears on the
display
Immediately unplug the power
cord, and check the following items
after "PROTECT" disappears.
 Are the + and  speaker cords
short-circuited?
 Is anything blocking the
ventilation holes of the system?
After you have checked these
above items and found no
problems, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
If "OVER CURRENT" appears on
the display
A problem has been detected with
the level of electrical current from
the (USB) port and Lightning
connector. Turn off the system and
remove the USB device and iPod/
iPhone from the
Lightning connector. Make sure
there is no problem with the USB
device and iPod/iPhone. If this
display pattern persists, contact
your nearest Sony dealer.
(USB) port and