Advertisement
Hair Type
Coarse, curly, hard-to-straighten
Fine, medium-textured or softly
waved
Pale, blonde, bleached or color-
treated
1 Connect the plug to a power supply socket.
2 Slide the on/off switch ( ) to
» The LED ( ) lights up and starts blinking.
3 Turn the rheostat wheel (
for your hair.
» After 60 seconds, the appliance is heated and the green LED
remains on without blinking.
» The ion function activates when the appliance is switched on. The
function provides additional shine and reduces frizz. When the
function is on, a special odor may be smelt and a sizzling noise
may be heard, which is normal and caused by the ions that are
generated.
4 Slide the closing lock ( ) to unlock the appliance.
5 Comb your hair and take a section that is not wider than 5cm for
straightening.
6 Place it between the straightening plates ( ) and press the handles
together.
7 Slide the straightener down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.
•
To create flicks, turn the straightener half-circle inwards
(or outwards) when it reaches the hair ends. Hold the straightener in
that position for 2 to 3 seconds, and then release it.
8 After 20 seconds, repeat step 6 until you achieve the desired look.
9 To straighten the rest of your hair, repeat steps 5 to 7.
Temperature Setting
Mid to High (setting 4 and
above)
Low to Mid (setting 4-5)
Low (below 4)
to switch on the appliance.
) to select a suitable temperature setting
b
Advertisement
