Hill Start Assist; Hints On Driving With Anti-Lock Brakes; Using Cruise Control - Ford B-MAX Quick Reference Manual

Ford b-max
Hide thumbs Also See for B-MAX:
Table of Contents

Advertisement

2. Insert the fuel nozzle up to and including
the first notch on the nozzle A. Keep it
resting on the cover of the fuel pipe
opening.
3. Operate the nozzle within the area
shown.
4. Slightly raise the fuel nozzle to remove
it.
B-MAX (CB2) , CG3574en enGBR, Edition date: 02/2014, None

HILL START ASSIST

The system makes it easier to pull away
when your vehicle is on a slope without the
need to use the parking brake.
When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes are released
automatically once the engine has
developed sufficient drive to prevent your
vehicle from rolling down the slope.
HINTS ON DRIVING WITH ANTI-
LOCK BRAKES
Note: When the system is operating, the
brake pedal will pulse and may travel further.
Maintain pressure on the brake pedal. You
may also hear a noise from the system. This
is normal.
The anti-lock braking system will not
eliminate the risks when:
you drive too closely to the vehicle in
front of you
your vehicle is hydroplaning
you take corners too fast
the road surface is poor.

USING CRUISE CONTROL

Switching Cruise Control On
11

Advertisement

Table of Contents
loading

Table of Contents