INFORMATION DISPLAY
CONTROL
AUTOWIPERS
A
High sensitivity
B
On
C
Low sensitivity
Use the rotary control to adjust the
sensitivity of the rain sensor. With low
sensitivity, the wipers will operate when the
sensor detects a large amount of moisture
on the windshield. With high sensitivity, the
wipers will operate when the sensor detects
a small amount of moisture on the
windshield.
Tourneo Custom/Transit Custom (TTF) , CG3580en enGBR, Edition date: 02/2014, None
AUTOLAMPS
Note: It may be necessary to switch your
headlamps on manually in severe weather
conditions.
The headlamps will switch on and off
automatically in low light situations or
during inclement weather.
HEADLAMP EXIT DELAY
After you switch the ignition off, you can
switch the headlamps on by pulling the
direction indicator lever toward you. You
will hear a short tone. The headlamps will
switch off automatically after three minutes
with any door open or 30 seconds after the
last door has been closed. You can cancel
this feature by pulling the direction indicator
toward you again or switching the ignition
on.
TRIP COMPUTER
Resetting the Trip Computer
Press and hold OK on the current screen to
reset the respective trip, distance, time and
average fuel information.
Trip Odometer
Registers the distance traveled of individual
journeys.
Distance to Empty
Indicates the approximate distance your
vehicle will travel on the fuel remaining in
the tank. Changes in driving pattern may
cause the value to vary.
5