Adjusting The Quality Of The External Display - Toshiba Satellite M45 User Manual

This hot key cycles through the settings in the following
order:
❖
❖
❖
3 Release the

Adjusting the quality of the external display

To obtain the best picture quality from your television (or
other video display device), you may need to adjust the video
settings. See the video device documentation for additional
configuration steps.
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
key.
Fn
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel, Appearance and Themes, and then Display.
Choose the Settings tab, click the Advanced button, select
Display Device, select the applicable Monitor type, and click
Apply or OK.
TECHNICAL NOTE: To use one of the simultaneous modes,
you must set the resolution of the internal display panel to
match the resolution of the external display device. The
external display device must support a resolution of 640 X 480
or higher.
Getting Started
Using external display devices
67