ASROCK 4CoreDual-VSTA User Manual page 62

AGP Slot and PCI Express Graphics AGP Slot and PCI Express Graphics
AGP Slot and PCI Express Graphics AGP Slot and PCI Express Graphics AGP Slot and PCI Express Graphics
Slot (PCI Express x 4) Installation Slot (PCI Express x 4) Installation
Slot (PCI Express x 4) Installation Slot (PCI Express x 4) Installation Slot (PCI Express x 4) Installation
(for Windows XP) (for Windows XP) (for Windows XP)
(for Windows XP) (for Windows XP)
This installation guide will lead you to install AGP VGA card
into AGP slot and PCI Express VGA card into PCI Express
Graphics slot (PCI Express x 4) properly. Please carefully
follow the procedures below according to the current
condition of your PC system.
Demo VGA card devices:
1. WinFast A340TDH + ASUS-EN5750
STEP1: Install the AGP card into the AGP slot. Please follow the
procedures below
If you want to install more than one graphics cards to this motherboard,
please follow the priority: AGP VGA card, PCI Express card ,and then PCI
card. Please do not install more than one graphics cards at the same time!
1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
2. Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
3. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
4. Fasten the card to the chassis with screws.
If you want to install more than one graphics cards to this motherboard,
please make sure that the AGP heatsink is not too thick to collide with PCI
Express card.
Guide Guide Guide
Guide Guide
1 1 1 1 1