Boot Settings Configuration; Security Screen - ASROCK 4CoreDual-VSTA User Manual

3.5.1 Boot Settings Configuration

3.5.1 3.5.1 Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration
3.5.1 3.5.1 Boot Settings Configuration
Boot Settings Configuration
Boot From Onboard LAN
VIA SATA Raid Utility
Bootup Num-Lock
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Boot From Onboard LAN
Use this item to enable or disable the Boot From Onboard LAN feature.
VIA SATA Raid Utility
Use this to enable or disable VIA
POST.
Boot Up Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.

3.6 Security Screen

3.6 3.6 Security Screen Security Screen Security Screen
3.6 3.6 Security Screen
In this section, you may set or change the supervisor/user password for the system.
For the user password, you may also clear it.
Main Advanced
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Clear User Password
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
To enable or disable the
boot from onboard LAN
[Disabled]
feature.
[Enabled]
[On]
Select Screen
Select Item
+ - Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
®
VT8237A SATA Raid BIOS Utility during
BIOS SETUP UTILITY
H/W Monitor Boot Security
Install or Change the
password.
Select Screen
Select Item
Enter Change
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
4 4 4 4
4 4 4 4 4 4
Exit