Table of Contents
Advertisement
6
Enter the Bluetooth PIN (1234) for your device
in your phone.
Tips About Pairing the Devices
• After the initial pairing, the two devices can
connect automatically each time you turn them
on.
• When your phone is connected to your device,
you are ready to make phone calls.
• When you turn on the device, it tries to
connect to the last phone to which it was
connected.
Receiving a Call
• Select Answer.
• Select Ignore to ignore the call.
Using the Device During a Call
During a call,
appears. Depending on the
screen shown on your device, the icon could look
different.
1
Select
.
2
Select an option:
• Select Keypad to view a keypad page for
using automated systems such as voice
mail.
• Select Handset to turn off the device but
remain on the call, or if you need privacy.
• To switch back, select Handsfree.
• Select Mute to turn off the sound on a call.
• Select End Call to end the call.
14
Dialing a Point of Interest
1
Select Phone > Points of Interest.
2
Search for a point of interest.
3
Select Call.
Dialing a Number
1
Select Phone > Dial.
2
Enter the number.
3
Select Dial.
Entering Your Home Phone Number
You can enter the phone number you want the
device to call when you select Call Home.
1
Select Phone > Call Home.
2
Select Enter Phone Number.
3
Enter the phone number.
4
Select Done.
Calling Home
Before you can call home using the Call Home
button, you must enter a phone number for your
home location.
Select Phone > Call Home.
Placing Calls Using Voice Dial
Before you can place calls using voice dial,
you may need to train your phone to recognize
your voice dial commands. Refer to your phone
instructions.
1
Select Phone > Voice Dial.
2
Speak the contact name.
Hnds-Free Phone Calls
Advertisement
Table of Contents
