To reset your device if it stops functioning, hold the power key for 10 seconds.
If your device is not acquiring satellite signals, consider the following:
Acquiring satellites can take several minutes. Ensure the device is turned on, and if necessary, go outdoors to an open area, away from tall buildings and trees.
If your device stops functioning, you can reset it by holding the power key for 10 seconds.
If your device is not charging in your vehicle, check the following:
To save a location, such as an address, as a favorite:
You can charge the device's battery using any of these methods:
The Garmin nuvi 2457LMT GPS provides various traffic updates:
To improve GPS accuracy, if necessary, go outdoors to an open area, away from tall buildings and trees.
Key navigation features include:
If your device stops functioning, you can reset it by holding the power key for 10 seconds.
If your device does not appear as a removable drive or portable device on your computer:
To adjust the screen brightness:
You can find points of interest (POIs) by category, using the search bar, or by browsing the map.
To find a location by category:
To find a location using the search bar:
To find custom POIs, you must first load them onto your device using POI Loader software:
To find a location using latitude and longitude coordinates:
The device supports microSD™™ and microSDHC memory cards. To install a memory card:
To connect the device to your vehicle's power source:
The device uses a suction cup mount that attaches to the windshield. A mounting disk is also mentioned for dashboard mounting.
To change the language for voice prompts:
Yes, the device has a GPS simulator feature. You can use it to set a simulated location if you are indoors or not receiving satellite signals.
To set a simulated location:
Need help?
Do you have a question about the nuvi 2457LMT and is the answer not in the manual?
Questions and answers