Table of Contents
Advertisement
Using myTrends
NOTE: myTrends only works for locations that are
saved as Favorites.
When myTrends is activated, the destination
and estimated time of travel will appear in the
navigation bar on the map. If a traffic receiver is
connected, traffic information may also appear in
the navigation bar.
When myTrends information appears in the
navigation bar, select the navigation bar to
view route information.
About the Transportation Modes
Automobile mode
Bicycle mode
Routes are calculated differently based on your
transportation mode.
For example, in Automobile mode, the estimated
time of arrival is calculated using the speed limit
of the roads on the route. Bicycle mode calculates
time of arrival based on cycling speed.
Pairing Your Phone
Hands-free calling is available on some nüvi
models. Before you can pair, your phone and the
device must be turned on and within 33 ft. (10 m)
of each other.
1
Enable the Bluetooth
phone.
2
Select Tools > Settings > Bluetooth.
nüvi 2580TV Quick Start Manual
component on your
®
3
Select Bluetooth > Enabled > Save.
4
Select Add Phone >
5
Select your phone, and select OK.
6
Enter the Bluetooth PIN (1234) for your device
in your phone.
About Traffic
notice
Garmin is not responsible for the accuracy or
timeliness of the traffic information.
NOTE: The traffic receiver is an optional
accessory. For information about traffic receivers
and coverage areas, go to www.garmin.com/traffic.
When and traffic receiver is connected, some
models can receive FM Traffic Message Channel
(TMC) traffic content. The FM TMC traffic
subscription is automatically enabled and does
not require an additional subscription purchase to
activate.
Manually Avoiding Traffic on Your Route
1
Select
.
2
Select Traffic On Route.
3
If necessary, select the arrows to view other
traffic delays on your route.
4
Select Avoid.
.
7
Advertisement
Table of Contents
