Page 3
CAUTION: Do not allow liquids to spill into any openings in the enclosure. If liquids get into the unit, turn it off immediately. ® Call Bose Customer Support as soon as possible to arrange for service. See the address list on the inside back cover.
Page 4
Tab 3, 11 Tab2, 10 English This product conforms to all EU Directive requirements as applicable by law. The complete Declaration of Conformity can be found at: www.Bose.com/static/compliance. Names and Contents of Toxic or Hazardous Substances or Elements ® For the SoundLink...
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English Product parts There are two versions of the SoundLink kit. The version you chose for your specific ® Acoustic Wave music system determines which steps you follow in making the connections.
Acoustic Wave ® system. ® 1. Plug the SoundLink adapter cable (with the words Bose link facing up) into the Bose link ® connector on the rear of the system. Bose link connector Bose link SoundLink ®...
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English Using SoundLink ® with your computer 1. Using the provided SoundLink ® remote control, press the SoundLink/CD button 1-2 times until SOUNDLINK appears on the front panel display. CONNECTING, and DISCOVERABLE will then appear in sequence on the front panel display.
Page 9
English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Tab 6, 14 Tab 7, 15 Tab 8, 16 ® 3. Check to be sure the SoundLink USB key power light turns on and begins to flash. 4.
COMPUTER appears on the front panel display. Multi-disc changers The SoundLink ® adapter cannot be used in USB key button conjunction with a multi-disc changer because the ® Acoustic Wave music system has only one Bose link input.
English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Tab 6, 14 Tab 7, 15 Tab 8, 16 If you don’t hear audio from the Acoustic Wave ® music system: Restart the music application ® If you don’t hear music from the Acoustic Wave music system after successfully connecting the USB key, you may need to quit and restart your music application.
1. Go to the Control Panel and choose Hardware and Sound. 2. Select Manage Audio Devices. 3. Under the Playback tab, select “Bose SoundLink Audio” and set it as the default. Note: After setting the audio source, you may need to restart your music application.
Device List Turn on your phone, tablet computer, or other device and locate its Bluetooth device list. Scroll through the device list and select “Bose SoundLink Audio”. 3. Enter Passcode If prompted for passcode, enter 0000. Some devices ask you to accept the connection.
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English Using multiple Bluetooth devices ® If you have paired the Wave system with more than one Bluetooth device, you can easily switch between devices by following these tips: Disconnect one source before connecting another •...
English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Tab 6, 14 Tab 7, 15 Tab 8, 16 Remote control functionality SoundLink/CD • Press: Selects the audio from your Mute computer or Bluetooth device, or the CD player. •...
• If you received an upgrade CD with your kit and have not used it, be sure SOUNDLINK or to run it now. COMPUTER do not • If problem persists, contact Bose Customer Service. Refer to the address appear on the Wave ® sys- list included in the carton.
• Make sure your music application is running and the volume is turned up and not muted. • Check your computer sound settings to make sure “Bose SoundLink Audio” is selected as the audio output device. Refer to page 12.
Page 18
USB key, restart your computer, and insert the USB key again. • Check your computer sound settings to make sure “Bose SoundLink Audio” is selected as the audio output device. Refer to page 12. • Refer to the owner’s guide, help system, or technical support for your com- puter to learn how to detect and install new hardware.
Follow this procedure: ® 1. Make sure your Acoustic Wave music system is plugged in and ready to use. For detailed instructions, refer to the Bose ® owner’s guide that came with the system. 2. Insert the update CD, label side up, into the disc drive on the Acoustic Wave ®...
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English If your kit includes an adapter power pack 1. On the rear of the SoundLink ® adapter, insert the adapter power pack plug into the DC power connector.
® provided on the product registration card that is included in the carton. Please complete the information section on the card and mail it to Bose. Failure to do so will not affect your limited warranty rights. What you must do to obtain Limited Warranty Service:...
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English Technical information Adapter power rating 100-240VAC, 50-60 Hz, Output: 5VDC, 500mA Connection range Wireless capability covers a range of up to 60 ft. (18.5 m), which can vary according to the type of home construction and signal obstructions (multiple walls, metal appliance, etc.).
Page 23
Tab 5, 13 Tab 6, 14 Tab 7, 15 Tab 8, 16 Bose system requirement ® Exclusive use of the Bose link connector on the rear of the Acoustic Wave music system. ® Bluetooth QD ID SoundLink ® USB key: B015403 SoundLink ®...
Need help?
Do you have a question about the ACOUSTIC WAVE SOUNDLINK ADAPTER and is the answer not in the manual?
Questions and answers