Output Level Adjustment - Eclipse E7703AVX Owner's Manual

Distance setting
1 Touch the
and set the distance from each
speaker to the listener position.
: Increases numerical value.
: Decreases numerical value.
Setting range is 0~4 m in steps of
0.05 m. As the numerical value for
distance becomes smaller, delay of
sound from the speaker to the listener
becomes larger.
Touch the
2
Returns to Setting Screen.
3 Touch the
Returns to Sound Adjustment Screen
Page 1.

Output level adjustment

If POSITION is set to "ON", speaker levels cannot be adjusted except for
the woofer. Make settings after switching POSITION to "OFF". (Refer to
ATTENTION
"Position setting," page 34.)
At the Speaker Setting Screen,
1
touch the
Switches
Adjustment Screen.
or touch switch
touch switch.
ESC
ESC touch switch.
touch switch.
SP level
to Speaker
53
Front Left Speaker
Front Center Speaker
Rear Right Speaker
Rear Left Speaker
Level
Basic operation
Front Right
Speaker