Other Icons; Reset - Brookstone Indoor/Outdoor Digital Thermometer User Manual

oTheR Icons

Normally, when temperature is within 32°F~140°F and the relative humidity is
20% RH~99% RH, the measurements will be displayed . If any temperature
is out of this range, other icons listed below will be shown:
1 . "--%": If the humidity area of the display shows "--% (IN)", it means the measured
temperature is lower than 32°F or higher than 140°F, or the measured humidity
is out of the defined measuring range or lower than 1% RH . When the ambient
conditions resume normal operation range, the humidity area of the display will
show the correct humidity accordingly . Relative humidity measurement will be
affected by temperature .
2 . "HH . H (IN)" or "HH . H (OUT)": When the measured temperature is higher
than 230°F, these icons will appear in the temperature display area .
3 . "LL . L (IN)" or "LL . L (OUT)": When the measured temperature is lower
than -58°F, these icons will appear in the temperature display area .
4 . "-- . - (out)": This icon will appear in the temperature display area if the sensor
cable is not well connected while measuring the outdoor temperature .

ReseT

If the device malfunctions or you want to clear all settings, use a thin, blunt
object to press the ReSeT button inside the BATTeRy COMPARTMeNT .
Pressing ReSeT will revert the unit to its original default settings plus
clear any alerts set .
11