Introduction - Razer MAMBA Master Manual

WIRED MODE
1. Connect the mini-USB end of the cable to
the Razer Mamba.
2. Plug mouse into the USB port of your
computer. The Razer Mamba is then ready
for use as a high performance wired
mouse. In addition, its battery will start
charging automatically in this wired mode.
3. To remove the cable, push cable button to
the right as shown before pulling out the
mini-USB connector.
™
8 | Fo r Ga mer s. b y Ga mer s.
Windows XP / x64 / Vista / Vista64 installation instructions
1. Download the Driver Installer from http://www.razersupport.com
2. Unzip the file and run the installer program.
3. The Razer Mamba introduction screen appears. Click CONTINUE.
4. Important information regarding the Razer Mamba driver will be shown. Click
CONTINUE after reading.
5. Read the software license agreement and click CONTINUE.
6. A confirmation popup screen will appear. Click AGREE if you accept all terms of the
agreement.
7. If you wish to choose the destination folder where the driver software will reside, click
CHANGE INSTALL LOCATION. Otherwise, click INSTALL to begin installation.
8. At the end of the installation, follow the instructions onscreen to restart your
computer. Click RESTART.
REGISTERING YOUR RAZER MAMBA
Please visit www.razerzone.com/registration/ for online product registration.
What you'll get:
• 2 years' limited manufacturer's warranty
• 6 month battery warranty
• Free online technical support at www.razersupport.com
w w w . r a z e rz o ne . c o m | 9