Connect The Usb Data Cable - Nokia 6790 User Giude

UMTS network that supports HSDPA, downloading data such
as messages, e-mail, and browser pages through the cellular
network may be faster. An active HSDPA connection is
indicated by . The icon may vary between regions.
To turn HSDPA on or off, select
Connection > Packet data > High speed packet access.
Some cellular networks do not allow incoming voice calls
when HSDPA is active, in which case you need to deactivate
HSDPA to receive calls. For more information, contact your
service provider.
For availability and subscription to data connection services,
contact your service provider.
HSDPA only affects the download speed; sending data to the
network, such as messages and e-mail, is not affected.

Connect the USB data cable

The USB connector is behind a cover.
The USB data cable is for data transfer only and does not
support charging.
© 2004 Nokia. All rights reserved.
> Tools > Settings and
To avoid corrupting data, do not disconnect the USB data
cable during data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect the
device to a compatible PC with the data cable.
2. When the device asks which mode to use, select Mass
storage. In this mode, you can see your device as a
removable hard drive in your computer.
3. End the connection from the computer (from the Unplug
or Eject Hardware wizard in Microsoft Windows, for
example) to avoid damaging the memory card.
To use Nokia PC Suite with your device, install Nokia PC Suite
on your PC, connect the data cable and select PC Suite.
To change the USB mode you normally use with the data
cable, select > Tools > Settings > Connectivity >
USB and USB connection mode, and the desired option.
35