Table of Contents
Advertisement
Switch the headset off
Place the headset into the clip or car
cradle, or press and hold the
multifunction key for about 5
seconds. The headset beeps, and the
red indicator light is briefly
displayed.
If the headset is not connected to a
device within about 30 minutes, it
switches off automatically.
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
You can pair the headset with up to
eight devices, but you can connect
it to a maximum of two devices at a
time.
To pair and connect the headset to a
device:
6
Copyright © 2010 Nokia. All rights reserved.
1. Make sure your mobile device is
switched on and the headset is
off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode, and
the blue indicator light starts to
flash quickly.
If the headset has been
previously paired with a device,
make sure the headset is
switched off and not placed in
the clip or car cradle, and press
and hold the multifunction key
for about 5 seconds until the
blue indicator light starts to
flash quickly.
3. Within about 3 minutes, activate
Bluetooth on your device, and
set it to search for Bluetooth
devices. For details, see the user
guide of your mobile device.
Advertisement
Table of Contents
