Get started
The headset contains the following
parts shown on the title page:
multifunction key (1), earloop (2),
indicator light (3), earpiece (4),
microphone (5), and charger
connector (6).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Compatible chargers
This device is intended for use when
supplied with power from the
following chargers: AC-3, AC-4, AC-
5, AC-8, DC-4 and DC-9. The exact
charger model number may vary
depending on the type of plug. The
plug variant is identified by one of
the following: E, X, AR, U, A, C, K, or
B.
4
Copyright © 2010 Nokia. All rights reserved.
Charge the battery
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector.
To charge the headset when it is
in the clip or car cradle, insert
the lower end of the headset into
the clip or car cradle (12), and
connect the charger cable to the
charger connector on the clip or
cradle (13).
The red indicator light is
displayed during charging.
Charging the battery fully may
take up to 2 hours.
3. When the battery is fully
charged, the green indicator
light is displayed. Disconnect the
charger from the headset (or