Kenmore 148.23683310 Use & Care Manual page 20

Side Burner Shelf
11
Loosen the three screws attached to the right panel of the burner box 3 to 4 turns as shown. Hang
the side burner shelf by the slotted holes in its side onto the loosened screws. Fasten the side burner
shelf from its bottom as shown with two 1/4-20 x 1" screws. Tighten the 3 previously loosened
screws.
Side Burner Shelf
12
Loosen and remove the two screws on the underside of the side burner holding it in place. Align the 2
bezel screw holes to those in side burner control panel. Insert the valve control stem through the hole
in control panel and bezel. Attach bezel to control panel and valve control stem with 2 screws as
shown. Be sure to attach bezel with black indicator mark facing straight up. Press Knob onto side
burner valve control stem. Make sure the side burner valve is inserted into the side burner, then insert
and tighten the 2 previously removed screws.
Side Burner Valve Control Stem
Loosen
Side Burner Shelf
Side Burner Shelf
Bezel
Knob
20
1/4-20 x 1" screw
Side Burner Valve
1/4-20 x 1"Screw
Qty. 2
M4 x 8 Screw
Qty. 2