Table of Contents
Advertisement
Checking the status for DTV mode
To check the status for DTV mode:
1 Press the DISPLAY button. The first status
screen appears.
KABC
AB WORLD
ENGLISH
1
2 3
1
Audio language (OTHER
appears when the audio
language cannot be acquired
or when the language is not
English, Spanish, or French)
2
Program title (maximum
2-line display)
3
Channel title
4
Channel number
5
Program air time
2 Press the DISPLAY button again. Program
guide information appears.
Program guide information
Note
• If the program guide information has more than
six lines, press the ENTER button to scroll
forward through the text or press the RETURN
to scroll back through the text.
• If there is not program guide information, "No
description provided" appears.
• When program guide information is displayed,
the closed captioning feature is interrupted.
3 Press the DISPLAY button again to display
all status information.
4 Press the DISPLAY button again to turn off
the status display.
12
CH 95-03
11:00AM- 1:00PM
4 5
www.insignia-products.com
Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo
Selecting a TV, DTV, or VCR sound mode
MTS (multi-channel television sound) lets you
listen to or record audio other than the main
audio for a channel or videotape. You can listen
to or record audio in monaural, stereo, or SAP
(secondary audio program).
To select the sound mode:
•
When you are receiving an MTS broadcast or
watching a videotape, press the MODE
button one or more times.
•
For TV, you can select STEREO, SAP, or
MONO.
Note
• For TV mode, the initial sound mode setting is
STEREO. Your TV combo automatically plays
stereo sound unless you select SAP
beforehand.
• If you select SAP when no secondary audio
programming is available, the main audio
plays.
• If you press the MODE button when you are
using an external device, nothing happens.
• The sound mode setting is reset to STEREO
when your turn off your TV combo or unplug
the power cord.
•
For DTV, you can select an audio
language. The language you can select
depends on the languages available for
the program.
•
For VCR, you can select MONO or HIFI.
Note
For VCR mode, the initial sound mode setting is
HIFI. When you play a videotape that was not
recorded in stereo, your TV combo plays mono
even if the setting is HIFI.
Setting the clock
You need to set the clock if you want to set up a
VCR timed recording.
Note
• We recommend that you set the clock
manually, then turn on the auto clock setting so
that your TV combo can adjust the time
periodically.
• You must use the remote control to set the
clock.
• If you unplug the power cord or lose power for
more than three seconds, you may have to
reset the clock.
Advertisement
Table of Contents
