Download Print this page

HP ProLiant ML570 Quickspecs page 13

Generation 4
Hide thumbs Also See for ProLiant ML570:

Advertisement

QuickSpecs
Standard Features
Power Supply
Power Supply
Power Supply
Power Supply
System Fans
System Fans
System Fans
System Fans
Required Cabling
Required Cabling
Required Cabling
Required Cabling
OS Support
OS Support
OS Support
OS Support
Rack Airflow
Rack Airflow
Rack Airflow
Rack Airflow
Requirements
Requirements
Requirements
Requirements
One 910W/1300W Hot Plug Power Supply ships standard. Second power supply is needed for
redundancy.
Two 910W/1300W Hot Plug Power Supplies ship standard in High Performance Models.
Three fans ship standard with three additional fans for redundancy
NOTE: High Performance models ship standard with redundant fans
NOTE:
NOTE:
NOTE:
For required cabling information, refer to the Web site at: www.hp.com/servers/proliantml570.
Microsoft Windows 2000 Server
Microsoft Windows 2003 Server
Microsoft Windows 2008 Server
Red Hat Enterprise Linux
SuSE Linux Enterprise Server
Novell NetWare
SCO OpenServer, UnixWare
Sun Solaris Intel Platform Edition
VMware Virtualization Software
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS
NOTE:
NOTE:
NOTE:
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select
NOTE:
NOTE:
NOTE:
your server:
http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc
=us&taskId=135&prodTypeId=15351&prodCatId=241435.
NOTE:
NOTE:
NOTE:
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
BladeSystem Server Linux matrix
NOTE:
NOTE: For more complete and up-to-date information on how to buy server operating systems from HP
NOTE:
NOTE:
please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html.
Rack 10000 series Cabinets
Rack 10000 series Cabinets
Rack 10000 series Cabinets
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION:
CAUTION:
CAUTION:
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
CAUTION:
CAUTION:
CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
DA - 12474
Worldwide — Version 28 — August 1, 2008
HP ProLiant ML570 Generation 4 (G4)
HP ProLiant ML570 Generation 4 (G4)
HP ProLiant ML570 Generation 4 (G4)
HP ProLiant ML570 Generation 4 (G4)
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
Page 13

Advertisement

loading

This manual is also suitable for:

Proliant ml570 generation 4Proliant ml570 g4