HP ProLiant DL365 Quickspecs page 2

QuickSpecs
Overview
Entry Models: HP Smart Array E200i/64MB Controller (128MB BBWC optional)
Internal Drive Support: Internal Drive Support: Internal Drive Support: Internal Drive Support:
Up to (6) small form factor (SFF) hot-plug drive bays
Up to 876GB SAS with optional hard drives
Up to 720GB SATA with optional hard drives
Slimline media bay supporting DVD or CD drive
Network Controller: Network Controller: Network Controller: Network Controller:
Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support for
Accelerated iSCSI through an optional Licensing Kit
Expansion Slots: Expansion Slots: Expansion Slots: Expansion Slots:
Two PCI-Express expansion slots: (1) full-length, full-height slot; (1) low-profile slot
USB 2.0 Ports: USB 2.0 Ports: USB 2.0 Ports: USB 2.0 Ports:
4 Total: (1) front, (1) internal and (2) rear accessible ports
Redundancy: Redundancy: Redundancy: Redundancy:
Multiple layers of fault tolerance through critical component redundancy (power supply and fan redundancy),
embedded RAID capability, and full-featured remote Lights-Out management
Management: Management: Management: Management:
Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over IP performance over shared network
access
Convenient slide-out Systems Insight Display for quick and easy front view server diagnostics
ProLiant Essential Foundation Pack standard, including HP Systems Insight Manager, SmartStart, SmartStart Scripting
Toolkit, Subscriber's Choice and ROM Based Setup Utility (RBSU)
Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU), HP System Insight Manager, Status LEDs including
system health, UID, and SmartStart
Form Factor: Form Factor: Form Factor: Form Factor:
1U Rack form factor (1.75"), less than 28 in (70.5 cm) deep
Deployment/Serviceability: Deployment/Serviceability: Deployment/Serviceability: Deployment/Serviceability:
Sliding rails for in rack servicing ship standard; optional 1U Cable Management Arm
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for
greater flexibility in performing defective parts replacement
Warranty: Warranty: Warranty: Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives
have a one-year warranty.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. NOTE: NOTE: NOTE:
Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12564 Worldwide — Version 31 — September 15, 2008
HP ProLiant DL365 HP ProLiant DL365 HP ProLiant DL365 HP ProLiant DL365
Page 2