Download Print this page

HP Pro 3000 Quickspecs page 37

Business pc

Advertisement

QuickSpecs
Technical Specifications
Additional Information
Microtower, Small Form Factor
RoHS Compliance
Material Usage
Battery size: CR2032 (coin cell)
Battery type: Lithium Metal
This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive -
2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE)
Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water
and Toxic Enforcement Act of 1986).
Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is 85% recyclable when properly disposed of at end of life.
Packaging Materials
External:
Corrugated 4250 g
Corrugated Carton 3855 g
Internal:
EPE - Expanded Polyethylene 690 g
The corrugated packaging material is made from 30% recycled content.
The EPE - Expanded Polyethylene material is made from 0% recycled content.
Hewlett-Packard is committed to compliance with all applicable environmental laws and regulations,
including the European Union Restriction of Hazardous Substances (RoHS) Directive. HP's goal is to exceed
compliance obligations by meeting the requirements of the RoHS Directive on a worldwide basis. By July 1,
2006, RoHS substances will be virtually eliminated (virtually = to levels below legal limits) for all HP
electronic products subject to the RoHS Directive, except where it is widely recognized that there is no
technically feasible alternative (as indicated by an exemption under the EU RoHS Directive).
This product does not contain any of the following substances in excess of regulatory limits (refer to the
HP General Specification for the Environment at:
http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/gen_specifications.html):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel - finishes must not be used on the external surface designed to be frequently handled or
carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
DA - 13483 North America — Version 8 — March 7, 2011
HP Pro 3000 Business PC
Page 37

Advertisement

loading