Registering The Handset - Gigaset N300 IP User Manual

9

Registering the handset

You must register the handset on both the handset (a) and the base (b).
a) On the handset
>
Start the registration procedure on the handset in accordance with the handset's user guide.
A message usually appears on the display stating that the handset is searching for a base that is
ready for registration.
b) On the base
>
Press and hold the registration/paging key on the base (approx. 3 seconds) within 60 seconds.
Once the handset has located the base, you will be asked to enter the base's system PIN.
>
Enter the four-digit system PIN for your base on the handset (default is 0000).
Once registration is complete, the handset returns to idle status. The handset's internal number is
shown in the display, e.g., INT 1. If not, repeat the procedure.
All base connections are assigned to the handset as receive connections as soon as registration is
complete (incoming calls are signalled on the handset and can be answered).
The fixed line connection is assigned to the handset as a send connection.
You can change this assignment.
14
Registering the handset